Easyinsmile Dental Endo Niti X3 Blue Files Endodontic Root Canal Engine Tips 21/25/31MM For Motor
$11.00
Features:
1.Brand: Easyinsmile
2.Length:21/25/31mm
3.Material: NITI
4.Very shape and soft, cutting efficiently, highly flexible.
5.4% Design for curved or complicated canal anatomy
6. Can be pre-bent and twisted will recover when heated over 60 Degree.
7.Rotation Speed:450 RPM Torque:1.5 N/CM2
8. Reliable tip design, avoid ledge, transportation.
9.Suitable for Curved Canals
10. Imported material, Time of Cyclic Fatigue until Breakage is up to 720 Seconds.
GUIDELINES FOR USE
Measure the length & negotiate the canal by #10 stainless steel K FILE
Negotiation by #15 stainless steel K files.
OPEN FILE to open the upper 1/3 part of the orifice. Speed 300rpm , Torque 3.0N.cm
Irrigate, then build a glide path by PATH FILE #19. Speed 350rpm, Torque 1.5N.cm
Use brushing motion with M3PG-1(white), M3PG-2(red), M3PG-3 (double red), M3PG-4(green) and short 1-2 mm amplitude strokes to prepare to work length, until it does not easily progress anymore. Speed 350 rpm, Torque 2.0/1.5/1.5N
It is very important to irrigate and negotiate the root canals with a suitable interval when near 1/3 of the apical to remove the debris. Repeat the above steps until preparation for the working length.
Tips:
◆Every time you change a file, please ensure to lubricate with enough EDTA frequently. (very important!! )
◆Preparation of the sharply curved root canals does big damage to the instruments, we recommend one-time use
◆BUT PLEASE USE DON'T MORE THAN 8 CANAL
Packing List:
6 files assorted per pack.
Real time:
5
Visitor right now
Features:
1.Brand: Easyinsmile
2.Length:21/25/31mm
3.Material: NITI
4.Very shape and soft, cutting efficiently, highly flexible.
5.4% Design for curved or complicated canal anatomy
6. Can be pre-bent and twisted will recover when heated over 60 Degree.
7.Rotation Speed:450 RPM Torque:1.5 N/CM2
8. Reliable tip design, avoid ledge, transportation.
9.Suitable for Curved Canals
10. Imported material, Time of Cyclic Fatigue until Breakage is up to 720 Seconds.
GUIDELINES FOR USE
Measure the length & negotiate the canal by #10 stainless steel K FILE
Negotiation by #15 stainless steel K files.
OPEN FILE to open the upper 1/3 part of the orifice. Speed 300rpm , Torque 3.0N.cm
Irrigate, then build a glide path by PATH FILE #19. Speed 350rpm, Torque 1.5N.cm
Use brushing motion with M3PG-1(white), M3PG-2(red), M3PG-3 (double red), M3PG-4(green) and short 1-2 mm amplitude strokes to prepare to work length, until it does not easily progress anymore. Speed 350 rpm, Torque 2.0/1.5/1.5N
It is very important to irrigate and negotiate the root canals with a suitable interval when near 1/3 of the apical to remove the debris. Repeat the above steps until preparation for the working length.
Tips:
◆Every time you change a file, please ensure to lubricate with enough EDTA frequently. (very important!! )
◆Preparation of the sharply curved root canals does big damage to the instruments, we recommend one-time use
◆BUT PLEASE USE DON'T MORE THAN 8 CANAL
Packing List:
6 files assorted per pack.
8204112-M
9999 Items
Specific References
Features:
1.Brand: Easyinsmile
2.Length:21/25/31mm
3.Material: NITI
4.Very shape and soft, cutting efficiently, highly flexible.
5.4% Design for curved or complicated canal anatomy
6. Can be pre-bent and twisted will recover when heated over 60 Degree.
7.Rotation Speed:450 RPM Torque:1.5 N/CM2
8. Reliable tip design, avoid ledge, transportation.
9.Suitable for Curved Canals
10. Imported material, Time of Cyclic Fatigue until Breakage is up to 720 Seconds.
GUIDELINES FOR USE
Measure the length & negotiate the canal by #10 stainless steel K FILE
Negotiation by #15 stainless steel K files.
OPEN FILE to open the upper 1/3 part of the orifice. Speed 300rpm , Torque 3.0N.cm
Irrigate, then build a glide path by PATH FILE #19. Speed 350rpm, Torque 1.5N.cm
Use brushing motion with M3PG-1(white), M3PG-2(red), M3PG-3 (double red), M3PG-4(green) and short 1-2 mm amplitude strokes to prepare to work length, until it does not easily progress anymore. Speed 350 rpm, Torque 2.0/1.5/1.5N
It is very important to irrigate and negotiate the root canals with a suitable interval when near 1/3 of the apical to remove the debris. Repeat the above steps until preparation for the working length.
Tips:
◆Every time you change a file, please ensure to lubricate with enough EDTA frequently. (very important!! )
◆Preparation of the sharply curved root canals does big damage to the instruments, we recommend one-time use
◆BUT PLEASE USE DON'T MORE THAN 8 CANAL
Packing List:
6 files assorted per pack.